1 files changed, 96 insertions, 0 deletions
diff --git a/static/freebsd/man4/pcf8574.4 b/static/freebsd/man4/pcf8574.4
new file mode 100644
index 00000000..900302a4
--- /dev/null
+++ b/static/freebsd/man4/pcf8574.4
@@ -0,0 +1,96 @@
+.\"
+.\" SPDX-License-Identifier: BSD-2-Clause
+.\"
+.\" Copyright (c) 2020 Andriy Gapon <avg@FreeBSD.org>
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\"    notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\"    notice, this list of conditions and the following disclaimer in the
+.\"    documentation and/or other materials provided with the distribution.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+.\" SUCH DAMAGE.
+.\"
+.Dd November 6, 2021
+.Dt PCF8574 4
+.Os
+.Sh NAME
+.Nm pcf8574
+.Nd driver for the PCF8574 8-bit I2C IO expander
+.Sh SYNOPSIS
+To compile this driver into the kernel,
+place the following lines in your
+kernel configuration file:
+.Bd -ragged -offset indent
+.Cd "device pcf8574"
+.Cd "device gpio"
+.Cd "device iicbus"
+.Ed
+.Pp
+Alternatively, to load the driver as a
+module at boot time, place the following line in
+.Xr loader.conf 5 :
+.Bd -literal -offset indent
+pcf8574_load="YES"
+.Ed
+.Sh DESCRIPTION
+The
+.Nm
+driver provides
+.Xr gpiobus 4
+control over 8 GPIO pins.
+The pins are quasi-bidirectional.
+Only low output can be actively driven.
+High output is equivalent to input.
+.Pp
+On an
+.Xr FDT 4
+based system the following properties must be set:
+.Bl -tag -width "compatible"
+.It Va compatible
+Must be set to "nxp,pcf8574".
+.It Va reg
+The I2C address of
+.Nm .
+.El
+.Pp
+The DTS part for a
+.Nm
+device usually looks like:
+.Bd -literal
+/ {
+
+	...
+	pcf8574@27 {
+		compatible = "nxp,pcf8574";
+		reg = <0x27>;
+	};
+};
+.Ed
+.Sh SEE ALSO
+.Xr fdt 4 ,
+.Xr gpiobus 4 ,
+.Xr iicbus 4
+.Sh HISTORY
+The
+.Nm
+driver and this manual page was written by
+.An Andriy Gapon Aq Mt avg@FreeBSD.org .
+.Sh BUGS
+The
+.Nm
+driver does not support the input change interrupt
+that the hardware provides.