docs: Removed Precompiled HTML

1 files changed, 0 insertions, 266 deletions

diff --git a/static/freebsd/man4/isp.4 3.html b/static/freebsd/man4/isp.4 3.html
deleted file mode 100644
index 52df9d2c..00000000
--- a/static/freebsd/man4/isp.4 3.html
+++ /dev/null
@@ -1,266 +0,0 @@
-<table class="head">
-  <tr>
-    <td class="head-ltitle">ISP(4)</td>
-    <td class="head-vol">Device Drivers Manual</td>
-    <td class="head-rtitle">ISP(4)</td>
-  </tr>
-</table>
-<div class="manual-text">
-<section class="Sh">
-<h1 class="Sh" id="NAME"><a class="permalink" href="#NAME">NAME</a></h1>
-<p class="Pp"><code class="Nm">isp</code> &#x2014; <span class="Nd">Qlogic
-    FibreChannel SCSI Host Adapters driver</span></p>
-</section>
-<section class="Sh">
-<h1 class="Sh" id="SYNOPSIS"><a class="permalink" href="#SYNOPSIS">SYNOPSIS</a></h1>
-<p class="Pp">To compile this driver into the kernel, place the following lines
-    in your kernel configuration file:</p>
-<div class="Bd Pp Bd-indent"><code class="Cd">device scbus</code>
-<br/>
-<code class="Cd">device isp</code>
-<br/>
-<code class="Cd">device ispfw</code></div>
-<p class="Pp">Alternatively, to load the driver as a module at boot time, place
-    the following lines in <a class="Xr">loader.conf(5)</a>:</p>
-<div class="Bd Pp Bd-indent Li">
-<pre>isp_load=&quot;YES&quot;
-ispfw_load=&quot;YES&quot;</pre>
-</div>
-</section>
-<section class="Sh">
-<h1 class="Sh" id="DESCRIPTION"><a class="permalink" href="#DESCRIPTION">DESCRIPTION</a></h1>
-<p class="Pp">This driver provides access to FibreChannel SCSI devices.</p>
-<p class="Pp">It supports initiator and target modes of FCP SCSI profile,
-    utilizing Class 3 and Class 2 connections. Support is available for Public
-    and Private loops, Point-to-Point and Fabric connections.</p>
-<p class="Pp">Supported FC-Tape functionality is highly recommended for
-    connections to tape drives that support it. It encompasses four elements
-    from the T-10 FCP-4 specification:</p>
-<ul class="Bl-bullet Bd-indent">
-  <li>Precise Delivery of Commands</li>
-  <li>Confirmed Completion of FCP I/O Operations</li>
-  <li>Retransmission of Unsuccessfully Transmitted IUs</li>
-  <li>Task Retry Identification</li>
-</ul>
-<p class="Pp">Together these features allow for link level error recovery with
-    tape devices. Without it, an initiator cannot, for instance, tell whether a
-    tape write command that has timed out resulted in all, part or none of the
-    data going to the tape drive. FC-Tape is automatically enabled when
-    connecting controller that supports it to a target that supports it. It may
-    be disabled using configuration and hint options described below.</p>
-</section>
-<section class="Sh">
-<h1 class="Sh" id="HARDWARE"><a class="permalink" href="#HARDWARE">HARDWARE</a></h1>
-<p class="Pp">The <code class="Nm">isp</code> driver supports the following
-    optical Fibre Channel adapters:</p>
-<table class="Bl-column">
-  <tr>
-    <td>Model:</td>
-    <td>Speed:</td>
-    <td>Bus:</td>
-  </tr>
-  <tr>
-    <td>Qlogic QLE2874 (2814)</td>
-    <td>64Gb</td>
-    <td>PCIe</td>
-  </tr>
-  <tr>
-    <td>Qlogic QLE2870/QLE2872 (2812)</td>
-    <td>64Gb</td>
-    <td>PCIe</td>
-  </tr>
-  <tr>
-    <td>Qlogic QLE2774 (2814)</td>
-    <td>32Gb</td>
-    <td>PCIe</td>
-  </tr>
-  <tr>
-    <td>Qlogic QLE2770/QLE2772 (2812)</td>
-    <td>32Gb</td>
-    <td>PCIe</td>
-  </tr>
-  <tr>
-    <td>Qlogic 2740/2742/2764 (2722/2714)</td>
-    <td>32Gb</td>
-    <td>PCIe</td>
-  </tr>
-  <tr>
-    <td>Qlogic 2690/2692/2694 (2684/2692)</td>
-    <td>16Gb</td>
-    <td>PCIe</td>
-  </tr>
-  <tr>
-    <td>Qlogic 267x/836x (2031/8031) FCoE</td>
-    <td>16Gb</td>
-    <td>PCIe</td>
-  </tr>
-  <tr>
-    <td>Qlogic 256x (2532)</td>
-    <td>8Gb</td>
-    <td>PCIe</td>
-  </tr>
-  <tr>
-    <td>Qlogic 246x (2432)</td>
-    <td>4Gb</td>
-    <td>PCIe</td>
-  </tr>
-  <tr>
-    <td>Qlogic 2422</td>
-    <td>4Gb</td>
-    <td>PCI-X</td>
-  </tr>
-</table>
-</section>
-<section class="Sh">
-<h1 class="Sh" id="FIRMWARE"><a class="permalink" href="#FIRMWARE">FIRMWARE</a></h1>
-<p class="Pp">Firmware loading is supported and handled by
-    <a class="Xr">firmware(9)</a>. The correct firmware is either loaded
-    automatically, if available for this type of adapter, or by manually loading
-    the <a class="Xr">ispfw(4)</a> module. It is strongly recommended that you
-    use the firmware available from <a class="Xr">ispfw(4)</a> as it is the one
-    that most likely has been tested with this driver.</p>
-</section>
-<section class="Sh">
-<h1 class="Sh" id="CONFIGURATION_OPTIONS"><a class="permalink" href="#CONFIGURATION_OPTIONS">CONFIGURATION
-  OPTIONS</a></h1>
-<p class="Pp">Target mode support for Fibre Channel adapters may be enabled with
-    the</p>
-<p class="Pp"><code class="Cd">options ISP_TARGET_MODE</code></p>
-<p class="Pp">option.</p>
-<p class="Pp">To disable FC-Tape, use the following configuration option:</p>
-<p class="Pp"><code class="Cd">options ISP_FCTAPE_OFF</code></p>
-<p class="Pp">Note that even if the ISP_FCTAPE_OFF option is used, it may be
-    overridden by the fctape hint described below.</p>
-</section>
-<section class="Sh">
-<h1 class="Sh" id="BOOT_OPTIONS"><a class="permalink" href="#BOOT_OPTIONS">BOOT
-  OPTIONS</a></h1>
-<p class="Pp">The following options are switchable by setting values in
-    <span class="Pa">/boot/device.hints</span>.</p>
-<p class="Pp">They are:</p>
-<dl class="Bl-tag">
-  <dt id="hint.isp."><var class="Va">hint.isp.</var><var class="Ar">N</var><var class="Va">.msi</var></dt>
-  <dd>Limit on number of Message Signaled Interrupts (MSI) to be used.</dd>
-  <dt id="hint.isp.~2"><var class="Va">hint.isp.</var><var class="Ar">N</var><var class="Va">.msix</var></dt>
-  <dd>Limit on number of Extended Message Signaled Interrupts (MSI-X) to be
-      used.</dd>
-  <dt id="hint.isp.~3"><var class="Va">hint.isp.</var><var class="Ar">N</var><var class="Va">.fwload_disable</var></dt>
-  <dd>A hint value to disable loading of firmware provided by
-      <a class="Xr">ispfw(4)</a>.</dd>
-  <dt id="hint.isp.~4"><var class="Va">hint.isp.</var><var class="Ar">N</var><var class="Va">.fwload_force</var></dt>
-  <dd>A hint value to prefer firmware provided by <a class="Xr">ispfw(4)</a>,
-      even if it is older than the firmware in flash on the board. If
-      fwload_disable is also specified, fwload_force will be ignored.
-    <p class="Pp">By default, with 27XX and newer controllers, the
-        <a class="Xr">isp(4)</a> driver will use the newer firmware. For older
-        controllers, the <a class="Xr">isp(4)</a> driver will use the firmware
-        provided by <a class="Xr">ispfw(4)</a> if it is available, and otherwise
-        use the firmware in flash on the board.</p>
-  </dd>
-  <dt id="hint.isp.~5"><var class="Va">hint.isp.</var><var class="Ar">N</var><var class="Va">.ignore_nvram</var></dt>
-  <dd>A hint value to ignore board NVRAM settings for. Otherwise use NVRAM
-      settings.</dd>
-  <dt id="hint.isp.~6"><var class="Va">hint.isp.</var><var class="Ar">N</var><var class="Va">.fullduplex</var></dt>
-  <dd>A hint value to set full duplex mode.</dd>
-  <dt id="hint.isp.~7"><var class="Va">hint.isp.</var><var class="Ar">N</var><var class="Va">.topology</var></dt>
-  <dd>A hint value to select topology of connection. Supported values are:
-    <p class="Pp"></p>
-    <dl class="Bl-tag Bl-compact">
-      <dt id="lport"><a class="permalink" href="#lport"><code class="Li">lport</code></a></dt>
-      <dd>Prefer arbitrated loop and fallback to point to point.</dd>
-      <dt id="nport"><a class="permalink" href="#nport"><code class="Li">nport</code></a></dt>
-      <dd>Prefer point to point and fallback to arbitrated loop.</dd>
-      <dt id="lport-only"><a class="permalink" href="#lport-only"><code class="Li">lport-only</code></a></dt>
-      <dd>Arbitrated loop only.</dd>
-      <dt id="nport-only"><a class="permalink" href="#nport-only"><code class="Li">nport-only</code></a></dt>
-      <dd>Point to point only.</dd>
-    </dl>
-  </dd>
-  <dt id="hint.isp.~8"><var class="Va">hint.isp.</var><var class="Ar">N</var><var class="Va">.portwwn</var></dt>
-  <dd>This should be the full 64 bit World Wide Port Name you would like to use,
-      overriding the value in NVRAM for the card.</dd>
-  <dt id="hint.isp.~9"><var class="Va">hint.isp.</var><var class="Ar">N</var><var class="Va">.nodewwn</var></dt>
-  <dd>This should be the full 64 bit World Wide Node Name you would like to use,
-      overriding the value in NVRAM for the card.</dd>
-  <dt id="hint.isp.~10"><var class="Va">hint.isp.</var><var class="Ar">N</var><var class="Va">.iid</var></dt>
-  <dd>A hint to override or set the Initiator ID or Loop ID. For Fibre Channel
-      cards in Local Loop topologies it is <var class="Ar">strongly</var>
-      recommended that you set this value to non-zero.</dd>
-  <dt id="hint.isp.~11"><var class="Va">hint.isp.</var><var class="Ar">N</var><var class="Va">.role</var></dt>
-  <dd>A hint to define default role for isp instance (0 -- none, 1 -- target, 2
-      -- initiator, 3 -- both).</dd>
-  <dt id="hint.isp.~12"><var class="Va">hint.isp.</var><var class="Ar">N</var><var class="Va">.debug</var></dt>
-  <dd>A hint value for a driver debug level (see the file
-      <span class="Pa">/usr/src/sys/dev/isp/ispvar.h</span> for the values.</dd>
-  <dt id="hint.isp.~13"><var class="Va">hint.isp.</var><var class="Ar">N</var><var class="Va">.vports</var></dt>
-  <dd>A hint to create specified number of additional virtual ports.</dd>
-  <dt id="hint.isp.~14"><var class="Va">hint.isp.</var><var class="Ar">N</var><var class="Va">.nofctape</var></dt>
-  <dd>Set this to 1 to disable FC-Tape operation on the given isp instance.</dd>
-  <dt id="hint.isp.~15"><var class="Va">hint.isp.</var><var class="Ar">N</var><var class="Va">.fctape</var></dt>
-  <dd>Set this to 1 to enable FC-Tape operation on the given isp instance for
-      targets that support it.</dd>
-</dl>
-</section>
-<section class="Sh">
-<h1 class="Sh" id="SYSCTL_OPTIONS"><a class="permalink" href="#SYSCTL_OPTIONS">SYSCTL
-  OPTIONS</a></h1>
-<dl class="Bl-tag">
-  <dt id="dev.isp."><var class="Va">dev.isp.</var><var class="Ar">N</var><var class="Va">.loop_down_limit</var></dt>
-  <dd>This value says how long to wait in seconds after loop has gone down
-      before giving up and expiring all of the devices that were visible. The
-      default is 300 seconds (5 minutes). A separate (nonadjustable) timeout is
-      used when booting to not stop booting on lack of FC connectivity.</dd>
-  <dt id="dev.isp.~2"><var class="Va">dev.isp.</var><var class="Ar">N</var><var class="Va">.gone_device_time</var></dt>
-  <dd>This value says how long to wait for devices to reappear if they
-      (temporarily) disappear due to loop or fabric events. While this timeout
-      is running, I/O to those devices will simply be held.</dd>
-  <dt id="dev.isp.~3"><var class="Va">dev.isp.</var><var class="Ar">N</var><var class="Va">.use_gff_id</var></dt>
-  <dd style="width: auto;">&#x00A0;</dd>
-  <dt id="dev.isp.~4"><var class="Va">dev.isp.</var><var class="Ar">N</var><var class="Va">.use_gft_id</var></dt>
-  <dd>Setting those options to 0 allows to disable use of GFF_ID and GFT_ID SNS
-      requests during FC fabric scan. It may be useful if switch does not
-      implement them correctly, preventing some devices from being found.
-      Disabling them may cause unneeded logins to ports not supporting target
-      role or even FCP at all. The default is 1 (enabled).</dd>
-  <dt id="dev.isp.~5"><var class="Va">dev.isp.</var><var class="Ar">N</var><var class="Va">.wwnn</var></dt>
-  <dd>This is the readonly World Wide Node Name value for this port.</dd>
-  <dt id="dev.isp.~6"><var class="Va">dev.isp.</var><var class="Ar">N</var><var class="Va">.wwpn</var></dt>
-  <dd>This is the readonly World Wide Port Name value for this port.</dd>
-  <dt id="dev.isp.~7"><var class="Va">dev.isp.</var><var class="Ar">N</var><var class="Va">.fw_version_flash</var></dt>
-  <dd>The readonly flash firmware version value in the active region of the
-      controller.</dd>
-  <dt id="dev.isp.~8"><var class="Va">dev.isp.</var><var class="Ar">N</var><var class="Va">.fw_version_ispfw</var></dt>
-  <dd>The readonly firmware version value provided by
-      <a class="Xr">ispfw(4)</a>.</dd>
-  <dt id="dev.isp.~9"><var class="Va">dev.isp.</var><var class="Ar">N</var><var class="Va">.fw_version_run</var></dt>
-  <dd>The readonly firmware version value currently executed on the
-    controller.</dd>
-</dl>
-</section>
-<section class="Sh">
-<h1 class="Sh" id="SEE_ALSO"><a class="permalink" href="#SEE_ALSO">SEE
-  ALSO</a></h1>
-<p class="Pp"><a class="Xr">da(4)</a>, <a class="Xr">intro(4)</a>,
-    <a class="Xr">ispfw(4)</a>, <a class="Xr">sa(4)</a>,
-    <a class="Xr">scsi(4)</a>, <a class="Xr">gmultipath(8)</a></p>
-</section>
-<section class="Sh">
-<h1 class="Sh" id="AUTHORS"><a class="permalink" href="#AUTHORS">AUTHORS</a></h1>
-<p class="Pp">The <code class="Nm">isp</code> driver was written by
-    <span class="An">Matthew Jacob</span> originally for NetBSD at NASA/Ames
-    Research Center. Later improvement was done by
-  <br/>
-  <span class="An">Alexander Motin</span>
-    &lt;<a class="Mt" href="mailto:mav@FreeBSD.org">mav@FreeBSD.org</a>&gt;.</p>
-</section>
-<section class="Sh">
-<h1 class="Sh" id="BUGS"><a class="permalink" href="#BUGS">BUGS</a></h1>
-<p class="Pp">The driver currently ignores some NVRAM settings.</p>
-</section>
-</div>
-<table class="foot">
-  <tr>
-    <td class="foot-date">April 8, 2025</td>
-    <td class="foot-os">FreeBSD 15.0</td>
-  </tr>
-</table>