HW4 Initial

22 files changed, 624 insertions, 0 deletions

diff --git a/cmpen472hw4_McDonnell/ASM_layout.hwl b/cmpen472hw4_McDonnell/ASM_layout.hwl
new file mode 100644
index 0000000..af05bda
--- /dev/null
+++ b/cmpen472hw4_McDonnell/ASM_layout.hwl
@@ -0,0 +1,18 @@
+OPEN source 0 0 60 42
+Source < attributes MARKS off
+OPEN assembly 60 0 40 30
+Assembly < attributes ADR on,CODE off,ABSADR on,SYMB off,TOPPC 0xF800
+OPEN procedure 60 60 40 17
+Procedure < attributes VALUES on,TYPES off
+OPEN register 60 30 40 30
+Register < attributes FORMAT AUTO,COMPLEMENT None
+OPEN memory 60 77 40 23
+Memory < attributes FORMAT hex,COMPLEMENT None,WORD 1,ASC on,ADR on,ADDRESS 0x80
+OPEN data 0 42 60 28
+Data < attributes SCOPE global,COMPLEMENT None,FORMAT Symb,MODE automatic,UPDATERATE 10,NAMEWIDTH 16
+OPEN command 0 70 60 30
+Command < attributes CACHESIZE 1000
+bckcolor 50331647
+font 'Courier New' 9 BLACK
+AUTOSIZE on
+ACTIVATE Assembly Memory Register Command Data Source Procedure
diff --git a/cmpen472hw4_McDonnell/Default.mem b/cmpen472hw4_McDonnell/Default.mem
new file mode 100644
index 0000000..bf49148
--- /dev/null
+++ b/cmpen472hw4_McDonnell/Default.mem
diff --git a/cmpen472hw4_McDonnell/Full_Chip_Simulation.hwc b/cmpen472hw4_McDonnell/Full_Chip_Simulation.hwc
new file mode 100644
index 0000000..f3ce7c9
--- /dev/null
+++ b/cmpen472hw4_McDonnell/Full_Chip_Simulation.hwc
@@ -0,0 +1 @@
+LOADMEM default.mem
diff --git a/cmpen472hw4_McDonnell/Full_Chip_Simulation.hwl b/cmpen472hw4_McDonnell/Full_Chip_Simulation.hwl
new file mode 100644
index 0000000..3516c73
--- /dev/null
+++ b/cmpen472hw4_McDonnell/Full_Chip_Simulation.hwl
@@ -0,0 +1,26 @@
+OPEN source 0 0 60 42
+Source < attributes TOOLTIP on,TOOLTIP_FORMAT signed,TOOLTIP_MODE details,FREEZE off,MARKS off
+OPEN assembly 60 0 40 30
+Assembly < attributes ADR on,CODE off,ABSADR on,SYMB off,FORMAT Auto,FREEZE off,TOPPC 0xCBCB
+OPEN procedure 60 60 40 17
+Procedure < attributes VALUES on,TYPES off
+OPEN register 60 30 40 30
+Register < attributes FORMAT AUTO,COMPLEMENT None
+OPEN memory 60 77 40 23
+Memory < attributes FORMAT hex,COMPLEMENT None,WORD 1,ASC on,ADR on,MODE automatic,UPDATERATE 10,ADDRESS 0x80
+OPEN data 0 42 60 28
+Data < attributes SCOPE global,COMPLEMENT None,FORMAT Symb,MODE automatic,SORT NotSort,UPDATERATE 10,NAMEWIDTH 16
+OPEN command 0 70 60 30
+Command < attributes CACHESIZE 1000
+OPEN Visualizationtool 63 50 26 29
+VisualizationTool< Attributes [stEditM="0",swGridMode="1",swRefresh="3",refCycles="1"]
+VisualizationTool< LoadInstrument LED[BoundX="102",BoundY="40",Port="0x0001",Port_PortEndian="1",swBIT="7"]
+VisualizationTool< LoadInstrument LED[BoundX="133",BoundY="41",Port="0x0001",Port_PortEndian="1",swBIT="6"]
+VisualizationTool< LoadInstrument LED[BoundX="166",BoundY="37",Port="0x0001",Port_PortEndian="1",swBIT="5"]
+VisualizationTool< LoadInstrument LED[BoundX="202",BoundY="42",Port="0x0001",Port_PortEndian="1",swBIT="4"]
+VisualizationTool< LoadInstrument DILSwitch[BoundX="83",BoundY="106",Port="0x0001"]
+VisualizationTool< ResetVT Undo
+bckcolor 50331647
+font 'Courier New' 9 BLACK
+AUTOSIZE on
+ACTIVATE "Assembly" "Memory" "Register" "Command" "Data" "Procedure" "Source" "VisualizationTool"
diff --git a/cmpen472hw4_McDonnell/Full_Chip_Simulation.ini b/cmpen472hw4_McDonnell/Full_Chip_Simulation.ini
new file mode 100644
index 0000000..0ea39fd
--- /dev/null
+++ b/cmpen472hw4_McDonnell/Full_Chip_Simulation.ini
@@ -0,0 +1,49 @@
+[Environment Variables]
+GENPATH={Project}Sources;{Compiler}lib\hc12c\src;{Compiler}lib\hc12c\include;{Compiler}lib\hc12c\lib;{Compiler}lib\xgatec\src;{Compiler}lib\xgatec\include;{Compiler}lib\xgatec\lib
+LIBPATH={Compiler}lib\hc12c\include;{Compiler}lib\xgatec\include
+OBJPATH={Project}bin
+TEXTPATH={Project}bin
+ABSPATH={Project}bin
+
+[HI-WAVE]
+Target=sim
+Layout=Full_Chip_Simulation.hwl
+LoadDialogOptions=AUTOERASEANDFLASH NORUNAFTERLOAD
+CPU=HC12
+MainFrame=2,3,-32000,-32000,-1,-1,985,223,2200,1246
+Configuration=Full_Chip_Simulation.hwc
+Statusbar=1
+ShowToolbar=1
+Smallborder=0
+Hideheadline=0
+Hidetitle=0
+TOOLBAR=57600 57601 32795 0 57635 57634 57637 0 57671 57669 0 32777 32776 32782 32780 32781 32778 0 32806
+
+
+
+
+
+
+
+
+
+[Simulator]
+CMDFILE0=CMDFILE STARTUP ON ".\cmd\Full_Chip_Simulation_startup.cmd"
+
+[Simulator HC12]
+CMDFILE0=CMDFILE RESET ON ".\cmd\Full_Chip_Simulation_reset.cmd"
+CMDFILE1=CMDFILE PRELOAD ON ".\cmd\Full_Chip_Simulation_preload.cmd"
+CMDFILE2=CMDFILE POSTLOAD ON ".\cmd\Full_Chip_Simulation_postload.cmd"
+CMDFILE3=CMDFILE SETCPU ON ".\cmd\Full_Chip_Simulation_setcpu.cmd"
+HCS12_SUPPORT=1
+FCS=MC9S12C32
+ZEROTIMEATRESET=1
+OSCFREQUENCY=48000000
+DISPLAYTIME=0
+
+
+[Recent Layout File List]
+File0=Full_Chip_Simulation.hwl
+File1=ASM_layout.hwl
+File2=
+File3=
diff --git a/cmpen472hw4_McDonnell/Sources/derivative.inc b/cmpen472hw4_McDonnell/Sources/derivative.inc
new file mode 100644
index 0000000..988343b
--- /dev/null
+++ b/cmpen472hw4_McDonnell/Sources/derivative.inc
@@ -0,0 +1,10 @@
+
+ ; Note: This file is recreated by the project wizard whenever the MCU is
+ ;       changed and should not be edited by hand
+ ;
+
+			; include derivative specific macros
+            INCLUDE 'mc9s12c32.inc'
+
+		
+
diff --git a/cmpen472hw4_McDonnell/Sources/main.asm b/cmpen472hw4_McDonnell/Sources/main.asm
new file mode 100644
index 0000000..bbf1a9a
--- /dev/null
+++ b/cmpen472hw4_McDonnell/Sources/main.asm
@@ -0,0 +1,172 @@
+**************************************************************************
+*
+* Title:        LED Light Dimmer
+*
+* Objective:    CMPEN 472 Homework 3
+*
+* Revision:     V1.0
+*
+* Date:         Feb. 5, 2025
+*
+* Programmer:   Jacob McDonnell
+*
+* Company:      The Pennsylvania State University
+*               Department of Computer Science and Engineering
+*
+* Algorithm:    Simple Parallel I/O use and time delay-loop demo
+*
+* Register Use: A: LED Light on/off state and Switch 1 on/off state
+*               X: Delay loop counter
+*
+* Memory Use:   RAM Locations from $3000 for data,
+*               RAM Locations from $3100 for program
+*
+* Input:        Parameters hard-coded in the program - PORTB
+*               Switch 1 at PORTB bit 0
+*               Switch 2 at PORTB bit 1
+*               Switch 3 at PORTB bit 2
+*               Switch 4 at PORTB bit 3
+*
+* Output:       LED 1 at PORTB bit 4
+*               LED 2 at PORTB bit 5
+*               LED 3 at PORTB bit 6
+*               LED 4 at PORTB bit 7
+*
+* Observation:  This program will dim the LED4 to either 5% when the 
+*               switch is not pressed and 15% when the switch is pressed.
+*
+* Note:         ON CSM-12C128 board,
+*               Switch 1 is at PORTB bit 0, and
+*               LED 4 is at PORTB bit 7.
+*
+* Comments:     This program is developed and simulated using CodeWarrior
+*               development software and targeted for Axion
+*               Manufacturing's CSM-12C128 board running at 24MHz.
+*
+**************************************************************************
+* Parameter Declearation Section
+*
+* Export Symbols
+            xdef        pgstart         ; export 'pgstart' symbol
+            absentry    pgstart         ; for assembly entry point
+
+* Symbols and Macros
+PORTA       equ         $0000           ; i/o port A addresses
+DDRA        equ         $0002           ; data direction register for PORTA
+PORTB       equ         $0001           ; i/o port B addresses
+DDRB        equ         $0003           ; data direction register for PORTB
+
+**************************************************************************
+* Data Section: address used [ $3000 to $30FF ] RAM Memory
+*
+            org         $3000           ; Reserved RAM memory starting address
+                                        ;   for Data for CMPEN 472 class
+Counter     dc.w        $0036           ; X register count number for time Delay
+                                        ;   loop for 10 useconds
+                                        ; The work to calculate this number is in
+                                        ; the comments for the delay10usec subroutine.
+                                        
+LEVEL       dc.b        $0005           ; Light Level that the LED should be
+
+*
+**************************************************************************
+* Program Section: address used [ $3100 to $3FFF ] RAM Memory
+*
+            org         $3100           ; Program start address, in RAM
+pgstart     lds         #$3100          ; initialize the stack pointer
+
+            ldaa        #%11110001      ; LED 1,2,3,4 at PORTB bit 4,5,6,7
+            staa        DDRB            ; set PORTB bit 4,5,6,7 as output
+
+
+            ldaa        #%01010000
+            staa        PORTB           ; Turn on only LEDs 1 & 3 on PORTB
+
+mainLoop
+            ldaa        #100            ; 1 ; load 100 into accumulator A
+            ldab        #100            ; 1 ; load 100 into accumulator B
+decrease    tbeq        A,increase      ; 3 ; Test if A == 0, skip loop if so
+            staa        LEVEL           ; 3 ; store A in counter LEVEL
+            jsr         dimmer          ; 4 + 25,135 ; jump to dimmer subroutine
+            jsr         dimmer          ; 4 + 25,135 ; jump to dimmer subroutine
+            jsr         dimmer          ; 4 + 25,135 ; jump to dimmer subroutine
+            jsr         dimmer          ; 4 + 25,135 ; jump to dimmer subroutine
+            deca                        ; 1 ; decrement accumulator A by 1
+            bra         decrease        ; 3 ; loop to decrease always
+increase    tbeq        B,mainLoop      ; 3 ; Test if B == 0, go back to mainLoop if so
+            staa        LEVEL           ; 3 ; store A in counter LEVEL
+            jsr         dimmer          ; 4 + 25,135 ; jump to dimmer subroutine
+            jsr         dimmer          ; 4 + 25,135 ; jump to dimmer subroutine
+            jsr         dimmer          ; 4 + 25,135 ; jump to dimmer subroutine
+            jsr         dimmer          ; 4 + 25,135 ; jump to dimmer subroutine
+            inca                        ; 1 ; increment accumulator A by 1
+            decb                        ; 1 ; decrement accumulator B by 1
+            bra         increase        ; 3 ; loop to increase always
+
+**************************************************************************
+* Subroutine Section: address used [ $3100 to $3FFF ] RAM Memory
+*
+
+;*************************************************************************
+; dimmer subroutine
+;
+; This subroutine will dim LED4 to a given level
+;
+; Input:                   Two 1 byte counters, ONN and OFF, for how many times
+;                          LED4 should be on and off for.
+; Output:                  LED4 dimmed to a given level, wasted cycles
+; Registers in use:        A accumulator to counter number of times looped
+; Memory locations in use: Two bytes ONN and OFF used to dim the LED4 to a given level
+;
+; Comments: This subroutine requires delay10usec subroutine
+;
+
+dimmer
+            bset        PORTB,%10000000 ; 6 ; Turn LED4 on
+            psha                        ; 2 ; Save A to the stack
+            ldaa        LEVEL           ; 3 ; Load the light level into accumulator A
+onDelay     tbeq        A, skipToOff    ; 3 ; Test if A == 0, skip loop if so
+            jsr         delay10usec     ; 244 ; delay for 10 microseconds
+            deca                        ; 1 ; decrement accumulator A by 1
+            bra         onDelay         ; 3, 1; jump back to onDelay always
+skipToOff   bclr        PORTB,%10000000 ; 6 ; Turn off LED4
+            ldaa        #100            ; 1 ; load 100 into accumulator A
+            suba        LEVEL           ; 3 ; Subtract LEVEL to get off count
+offDelay    tbeq        A,doneLoop      ; 3 ; Test if A == 0, skip loop if so
+            jsr         delay10usec     ; 244 ; delay 10 microseconds
+            deca                        ; 1 ; decrement accumulator A by 1
+            bra         offDelay        ; 3, 1; jump back to offDelay always
+doneLoop    pula                        ; 3 ; restore A from the stack
+            rts                         ; 5 ; return to caller
+
+;*************************************************************************
+; delay10usec subroutine
+;
+; This subroutine causes a 10 usec. delay
+;
+; Input:                   a 16bit count number in 'Counter'
+; Output:                  time delay, cpu cycle wasted
+; Registers in use:        X register, as counter
+; Memory locations in use: a 16bit input number at 'Counter'
+;
+; Comments: Code relies on counter being $39 to be exactly 10 usec work is below
+; Given: freq = 24MHz = 24000000     sec = 10 usec = 0.00001
+; freq = cycles / seconds
+; 
+; cycles = freq * seconds = 24000000Hz * 0.00001 = 240
+; 
+; This sub routine is 12 + 4 * 'Counter' cycles long, solving for 'Counter'
+; the result is found to be 57.
+;
+
+delay10usec
+            pshx                        ; Save register x to the stack
+            ldx         Counter         ; load counter into register x
+innerLoop   dex                         ; decrement register x by 1
+            bne         innerLoop       ; loop while register x is not 0
+            pulx                        ; restore register x from the stack
+            nop                         ; extra nop to make exactly 10 usec
+            rts                         ; return to caller
+
+            end                         ; last line of the file
+
diff --git a/cmpen472hw4_McDonnell/bin/Project.abs b/cmpen472hw4_McDonnell/bin/Project.abs
new file mode 100644
index 0000000..2810115
--- /dev/null
+++ b/cmpen472hw4_McDonnell/bin/Project.abs
diff --git a/cmpen472hw4_McDonnell/bin/Project.abs.phy b/cmpen472hw4_McDonnell/bin/Project.abs.phy
new file mode 100644
index 0000000..a4c9853
--- /dev/null
+++ b/cmpen472hw4_McDonnell/bin/Project.abs.phy
@@ -0,0 +1,2 @@
+S0580000433A5C55736572735C4A61636F62204D63446F6E6E656C6C5C446F63756D656E74735C434D50454E2D3437322D48575C636D70656E3437326877345F4D63446F6E6E656C6C5C62696E5C50726F6A6563742E6162734C
+S9030000FC
diff --git a/cmpen472hw4_McDonnell/bin/Project.abs.s19 b/cmpen472hw4_McDonnell/bin/Project.abs.s19
new file mode 100644
index 0000000..82aa46b
--- /dev/null
+++ b/cmpen472hw4_McDonnell/bin/Project.abs.s19
@@ -0,0 +1,7 @@
+S0580000433A5C55736572735C4A61636F62204D63446F6E6E656C6C5C446F63756D656E74735C434D50454E2D3437322D48575C636D70656E3437326877345F4D63446F6E6E656C6C5C62696E5C50726F6A6563742E6162734C
+S10630000036058E
+S1233100CF310086F15A0386505A018664C6640440127A300216313A16313A16313A1631C6
+S12331203A4320EB0451E47A300216313A16313A16313A16313A425320EA4C018036B63092
+S12331400204400616315D4320F74D01808664B0300204400616315D4320F7323D34FE306E
+S10A3160000926FD30A73D24
+S9030000FC
diff --git a/cmpen472hw4_McDonnell/bin/main.dbg b/cmpen472hw4_McDonnell/bin/main.dbg
new file mode 100644
index 0000000..4154ae3
--- /dev/null
+++ b/cmpen472hw4_McDonnell/bin/main.dbg
@@ -0,0 +1,170 @@
+**************************************************************************
+*
+* Title:        LED Light Dimmer
+*
+* Objective:    CMPEN 472 Homework 3
+*
+* Revision:     V1.0
+*
+* Date:         Feb. 5, 2025
+*
+* Programmer:   Jacob McDonnell
+*
+* Company:      The Pennsylvania State University
+*               Department of Computer Science and Engineering
+*
+* Algorithm:    Simple Parallel I/O use and time delay-loop demo
+*
+* Register Use: A: LED Light on/off state and Switch 1 on/off state
+*               X: Delay loop counter
+*
+* Memory Use:   RAM Locations from $3000 for data,
+*               RAM Locations from $3100 for program
+*
+* Input:        Parameters hard-coded in the program - PORTB
+*               Switch 1 at PORTB bit 0
+*               Switch 2 at PORTB bit 1
+*               Switch 3 at PORTB bit 2
+*               Switch 4 at PORTB bit 3
+*
+* Output:       LED 1 at PORTB bit 4
+*               LED 2 at PORTB bit 5
+*               LED 3 at PORTB bit 6
+*               LED 4 at PORTB bit 7
+*
+* Observation:  This program will dim the LED4 to either 5% when the 
+*               switch is not pressed and 15% when the switch is pressed.
+*
+* Note:         ON CSM-12C128 board,
+*               Switch 1 is at PORTB bit 0, and
+*               LED 4 is at PORTB bit 7.
+*
+* Comments:     This program is developed and simulated using CodeWarrior
+*               development software and targeted for Axion
+*               Manufacturing's CSM-12C128 board running at 24MHz.
+*
+**************************************************************************
+* Parameter Declearation Section
+*
+* Export Symbols
+            xdef        pgstart         ; export 'pgstart' symbol
+            absentry    pgstart         ; for assembly entry point
+
+* Symbols and Macros
+PORTA       equ         $0000           ; i/o port A addresses
+DDRA        equ         $0002           ; data direction register for PORTA
+PORTB       equ         $0001           ; i/o port B addresses
+DDRB        equ         $0003           ; data direction register for PORTB
+
+**************************************************************************
+* Data Section: address used [ $3000 to $30FF ] RAM Memory
+*
+            org         $3000           ; Reserved RAM memory starting address
+                                        ;   for Data for CMPEN 472 class
+Counter     dc.w        $0036           ; X register count number for time Delay
+                                        ;   loop for 10 useconds
+                                        ; The work to calculate this number is in
+                                        ; the comments for the delay10usec subroutine.
+                                        
+LEVEL       dc.b        $0005           ; Light Level that the LED should be
+
+*
+**************************************************************************
+* Program Section: address used [ $3100 to $3FFF ] RAM Memory
+*
+            org         $3100           ; Program start address, in RAM
+pgstart     lds         #$3100          ; initialize the stack pointer
+
+            ldaa        #%11110001      ; LED 1,2,3,4 at PORTB bit 4,5,6,7
+            staa        DDRB            ; set PORTB bit 4,5,6,7 as output
+
+
+            ldaa        #%01010000
+            staa        PORTB           ; Turn on only LEDs 1 & 3 on PORTB
+
+mainLoop
+            ldaa        #100            ; 1 ; load 100 into accumulator A
+            ldab        #100            ; 1 ; load 100 into accumulator B
+decrease    tbeq        A,increase      ; 3 ; Test if A == 0, skip loop if so
+            staa        LEVEL           ; 3 ; store A in counter LEVEL
+            jsr         dimmer          ; 4 + 25,135 ; jump to dimmer subroutine
+            jsr         dimmer          ; 4 + 25,135 ; jump to dimmer subroutine
+            jsr         dimmer          ; 4 + 25,135 ; jump to dimmer subroutine
+            jsr         dimmer          ; 4 + 25,135 ; jump to dimmer subroutine
+            deca                        ; 1 ; decrement accumulator A by 1
+            bra         decrease        ; 3 ; loop to decrease always
+increase    tbeq        B,mainLoop      ; 3 ; Test if B == 0, go back to mainLoop if so
+            staa        LEVEL           ; 3 ; store A in counter LEVEL
+            jsr         dimmer          ; 4 + 25,135 ; jump to dimmer subroutine
+            jsr         dimmer          ; 4 + 25,135 ; jump to dimmer subroutine
+            jsr         dimmer          ; 4 + 25,135 ; jump to dimmer subroutine
+            jsr         dimmer          ; 4 + 25,135 ; jump to dimmer subroutine
+            inca                        ; 1 ; increment accumulator A by 1
+            decb                        ; 1 ; decrement accumulator B by 1
+            bra         increase        ; 3 ; loop to increase always
+
+**************************************************************************
+* Subroutine Section: address used [ $3100 to $3FFF ] RAM Memory
+*
+
+;*************************************************************************
+; dimmer subroutine
+;
+; This subroutine will dim LED4 to a given level
+;
+; Input:                   Two 1 byte counters, ONN and OFF, for how many times
+;                          LED4 should be on and off for.
+; Output:                  LED4 dimmed to a given level, wasted cycles
+; Registers in use:        A accumulator to counter number of times looped
+; Memory locations in use: Two bytes ONN and OFF used to dim the LED4 to a given level
+;
+; Comments: This subroutine requires delay10usec subroutine
+;
+
+dimmer
+            bset        PORTB,%10000000 ; 6 ; Turn LED4 on
+            psha                        ; 2 ; Save A to the stack
+            ldaa        LEVEL           ; 3 ; Load the light level into accumulator A
+onDelay     tbeq        A, skipToOff    ; 3 ; Test if A == 0, skip loop if so
+            jsr         delay10usec     ; 244 ; delay for 10 microseconds
+            deca                        ; 1 ; decrement accumulator A by 1
+            bra         onDelay         ; 3, 1; jump back to onDelay always
+skipToOff   bclr        PORTB,%10000000 ; 6 ; Turn off LED4
+            ldaa        #100            ; 1 ; load 100 into accumulator A
+            suba        LEVEL           ; 3 ; Subtract LEVEL to get off count
+offDelay    tbeq        A,doneLoop      ; 3 ; Test if A == 0, skip loop if so
+            jsr         delay10usec     ; 244 ; delay 10 microseconds
+            deca                        ; 1 ; decrement accumulator A by 1
+            bra         offDelay        ; 3, 1; jump back to offDelay always
+doneLoop    pula                        ; 3 ; restore A from the stack
+            rts                         ; 5 ; return to caller
+
+;*************************************************************************
+; delay10usec subroutine
+;
+; This subroutine causes a 10 usec. delay
+;
+; Input:                   a 16bit count number in 'Counter'
+; Output:                  time delay, cpu cycle wasted
+; Registers in use:        X register, as counter
+; Memory locations in use: a 16bit input number at 'Counter'
+;
+; Comments: Code relies on counter being $39 to be exactly 10 usec work is below
+; Given: freq = 24MHz = 24000000     sec = 10 usec = 0.00001
+; freq = cycles / seconds
+; 
+; cycles = freq * seconds = 24000000Hz * 0.00001 = 240
+; 
+; This sub routine is 12 + 4 * 'Counter' cycles long, solving for 'Counter'
+; the result is found to be 57.
+;
+
+delay10usec
+            pshx                        ; Save register x to the stack
+            ldx         Counter         ; load counter into register x
+innerLoop   dex                         ; decrement register x by 1
+            bne         innerLoop       ; loop while register x is not 0
+            pulx                        ; restore register x from the stack
+            nop                         ; extra nop to make exactly 10 usec
+            rts                         ; return to caller
+
diff --git a/cmpen472hw4_McDonnell/cmd/Full_Chip_Simulation_Postload.cmd b/cmpen472hw4_McDonnell/cmd/Full_Chip_Simulation_Postload.cmd
new file mode 100644
index 0000000..ac4d359
--- /dev/null
+++ b/cmpen472hw4_McDonnell/cmd/Full_Chip_Simulation_Postload.cmd
@@ -0,0 +1 @@
+// After load the commands written below will be executed
diff --git a/cmpen472hw4_McDonnell/cmd/Full_Chip_Simulation_Preload.cmd b/cmpen472hw4_McDonnell/cmd/Full_Chip_Simulation_Preload.cmd
new file mode 100644
index 0000000..0bed464
--- /dev/null
+++ b/cmpen472hw4_McDonnell/cmd/Full_Chip_Simulation_Preload.cmd
@@ -0,0 +1 @@
+// Before load the commands written below will be executed
diff --git a/cmpen472hw4_McDonnell/cmd/Full_Chip_Simulation_Reset.cmd b/cmpen472hw4_McDonnell/cmd/Full_Chip_Simulation_Reset.cmd
new file mode 100644
index 0000000..bf55944
--- /dev/null
+++ b/cmpen472hw4_McDonnell/cmd/Full_Chip_Simulation_Reset.cmd
@@ -0,0 +1 @@
+// After reset the commands written below will be executed
diff --git a/cmpen472hw4_McDonnell/cmd/Full_Chip_Simulation_SetCPU.cmd b/cmpen472hw4_McDonnell/cmd/Full_Chip_Simulation_SetCPU.cmd
new file mode 100644
index 0000000..6a1549a
--- /dev/null
+++ b/cmpen472hw4_McDonnell/cmd/Full_Chip_Simulation_SetCPU.cmd
@@ -0,0 +1 @@
+// At startup the commands written below will be executed
diff --git a/cmpen472hw4_McDonnell/cmd/Full_Chip_Simulation_Startup.cmd b/cmpen472hw4_McDonnell/cmd/Full_Chip_Simulation_Startup.cmd
new file mode 100644
index 0000000..6a1549a
--- /dev/null
+++ b/cmpen472hw4_McDonnell/cmd/Full_Chip_Simulation_Startup.cmd
@@ -0,0 +1 @@
+// At startup the commands written below will be executed
diff --git a/cmpen472hw4_McDonnell/cmpen472hw4_McDonnell.mcp b/cmpen472hw4_McDonnell/cmpen472hw4_McDonnell.mcp
new file mode 100644
index 0000000..fb59bbf
--- /dev/null
+++ b/cmpen472hw4_McDonnell/cmpen472hw4_McDonnell.mcp
diff --git a/cmpen472hw4_McDonnell/cmpen472hw4_McDonnell_Data/CWSettingsWindows.stg b/cmpen472hw4_McDonnell/cmpen472hw4_McDonnell_Data/CWSettingsWindows.stg
new file mode 100644
index 0000000..6a4af3a
--- /dev/null
+++ b/cmpen472hw4_McDonnell/cmpen472hw4_McDonnell_Data/CWSettingsWindows.stg
diff --git a/cmpen472hw4_McDonnell/cmpen472hw4_McDonnell_Data/Standard/ObjectCode/main.asm.o b/cmpen472hw4_McDonnell/cmpen472hw4_McDonnell_Data/Standard/ObjectCode/main.asm.o
new file mode 100644
index 0000000..2810115
--- /dev/null
+++ b/cmpen472hw4_McDonnell/cmpen472hw4_McDonnell_Data/Standard/ObjectCode/main.asm.o
diff --git a/cmpen472hw4_McDonnell/cmpen472hw4_McDonnell_Data/Standard/ObjectCode/main.asm.sx b/cmpen472hw4_McDonnell/cmpen472hw4_McDonnell_Data/Standard/ObjectCode/main.asm.sx
new file mode 100644
index 0000000..fbb3fb6
--- /dev/null
+++ b/cmpen472hw4_McDonnell/cmpen472hw4_McDonnell_Data/Standard/ObjectCode/main.asm.sx
@@ -0,0 +1,7 @@
+S0840000433A5C55736572735C4A61636F62204D63446F6E6E656C6C5C446F63756D656E74735C434D50454E2D3437322D48575C636D70656E3437326877345F4D63446F6E6E656C6C5C636D70656E3437326877345F4D63446F6E6E656C6C5F446174615C5374616E646172645C4F626A656374436F64655C6D61696E2E61736D2E70726DD1
+S10630000036058E
+S1233100CF310086F15A0386505A018664C6640440127A300216313A16313A16313A1631C6
+S12331203A4320EB0451E47A300216313A16313A16313A16313A425320EA4C018036B63092
+S12331400204400616315D4320F74D01808664B0300204400616315D4320F7323D34FE306E
+S10A3160000926FD30A73D24
+S9033100CB
diff --git a/cmpen472hw4_McDonnell/cmpen472hw4_McDonnell_Data/Standard/TargetDataWindows.tdt b/cmpen472hw4_McDonnell/cmpen472hw4_McDonnell_Data/Standard/TargetDataWindows.tdt
new file mode 100644
index 0000000..ecf32b1
--- /dev/null
+++ b/cmpen472hw4_McDonnell/cmpen472hw4_McDonnell_Data/Standard/TargetDataWindows.tdt
diff --git a/cmpen472hw4_McDonnell/prm/burner.bbl b/cmpen472hw4_McDonnell/prm/burner.bbl
new file mode 100644
index 0000000..0c57619
--- /dev/null
+++ b/cmpen472hw4_McDonnell/prm/burner.bbl
@@ -0,0 +1,157 @@
+/* logical s-record file */
+OPENFILE "%ABS_FILE%.s19"
+format=motorola
+busWidth=1
+origin=0
+len=0x1000000
+destination=0
+SRECORD=Sx
+SENDBYTE 1 "%ABS_FILE%"
+CLOSE
+
+
+/* physical s-record file */
+OPENFILE "%ABS_FILE%.phy"
+format = motorola
+busWidth = 1
+len = 0x4000
+
+/* logical non banked flash at $4000 and $C000 to physical */
+origin = 0x004000
+destination = 0x0F8000
+SENDBYTE 1 "%ABS_FILE%"
+
+origin = 0x00C000
+destination = 0x0FC000
+SENDBYTE 1 "%ABS_FILE%"
+
+/* physical FTS512K flash window to physical 
+origin = 0x008000
+destination = 0x080000 
+SENDBYTE 1 "%ABS_FILE%"
+*/
+
+/* physical FTS256K parts flash window to physical 
+origin = 0x008000
+destination = 0x0C0000 
+SENDBYTE 1 "%ABS_FILE%"
+*/
+
+/* physical FTS128K parts flash window to physical 
+origin = 0x008000
+destination = 0x0E0000 
+SENDBYTE 1 "%ABS_FILE%"
+*/
+
+/* physical FTS64K parts flash window to physical 
+origin = 0x008000
+destination = 0x0F0000 
+SENDBYTE 1 "%ABS_FILE%"
+*/
+
+/* physical FTS32K parts flash window to physical 
+origin = 0x008000
+destination = 0x0F8000 
+SENDBYTE 1 "%ABS_FILE%"
+*/
+
+/* logical 512 kB banked flash to physical */
+origin = 0x208000
+destination = 0x080000
+SENDBYTE 1 "%ABS_FILE%"
+origin = 0x218000
+destination = 0x084000
+SENDBYTE 1 "%ABS_FILE%"
+origin = 0x228000
+destination = 0x088000
+SENDBYTE 1 "%ABS_FILE%"
+origin = 0x238000
+destination = 0x08C000
+SENDBYTE 1 "%ABS_FILE%"
+origin = 0x248000
+destination = 0x090000
+SENDBYTE 1 "%ABS_FILE%"
+origin = 0x258000
+destination = 0x094000
+SENDBYTE 1 "%ABS_FILE%"
+origin = 0x268000
+destination = 0x098000
+SENDBYTE 1 "%ABS_FILE%"
+origin = 0x278000
+destination = 0x09C000
+SENDBYTE 1 "%ABS_FILE%"
+origin = 0x288000
+destination = 0x0A0000
+SENDBYTE 1 "%ABS_FILE%"
+origin = 0x298000
+destination = 0x0A4000
+SENDBYTE 1 "%ABS_FILE%"
+origin = 0x2A8000
+destination = 0x0A8000
+SENDBYTE 1 "%ABS_FILE%"
+origin = 0x2B8000
+destination = 0x0AC000
+SENDBYTE 1 "%ABS_FILE%"
+origin = 0x2C8000
+destination = 0x0B0000
+SENDBYTE 1 "%ABS_FILE%"
+origin = 0x2D8000
+destination = 0x0B4000
+SENDBYTE 1 "%ABS_FILE%"
+origin = 0x2E8000
+destination = 0x0B8000
+SENDBYTE 1 "%ABS_FILE%"
+origin = 0x2F8000
+destination = 0x0BC000
+SENDBYTE 1 "%ABS_FILE%"
+origin = 0x308000
+destination = 0x0C0000
+SENDBYTE 1 "%ABS_FILE%"
+origin = 0x318000
+destination = 0x0C4000
+SENDBYTE 1 "%ABS_FILE%"
+origin = 0x328000
+destination = 0x0C8000
+SENDBYTE 1 "%ABS_FILE%"
+origin = 0x338000
+destination = 0x0CC000
+SENDBYTE 1 "%ABS_FILE%"
+origin = 0x348000
+destination = 0x0D0000
+SENDBYTE 1 "%ABS_FILE%"
+origin = 0x358000
+destination = 0x0D4000
+SENDBYTE 1 "%ABS_FILE%"
+origin = 0x368000
+destination = 0x0D8000
+SENDBYTE 1 "%ABS_FILE%"
+origin = 0x378000
+destination = 0x0DC000
+SENDBYTE 1 "%ABS_FILE%"
+origin = 0x388000
+destination = 0x0E0000
+SENDBYTE 1 "%ABS_FILE%"
+origin = 0x398000
+destination = 0x0E4000
+SENDBYTE 1 "%ABS_FILE%"
+origin = 0x3A8000
+destination = 0x0E8000
+SENDBYTE 1 "%ABS_FILE%"
+origin = 0x3B8000
+destination = 0x0EC000
+SENDBYTE 1 "%ABS_FILE%"
+origin = 0x3C8000
+destination = 0x0F0000
+SENDBYTE 1 "%ABS_FILE%"
+origin = 0x3D8000
+destination = 0x0F4000
+SENDBYTE 1 "%ABS_FILE%"
+origin = 0x3E8000
+destination = 0x0F8000
+SENDBYTE 1 "%ABS_FILE%"
+origin = 0x3F8000
+destination = 0x0FC000
+SENDBYTE 1 "%ABS_FILE%"
+
+CLOSE
+