diff options
Diffstat (limited to 'static/v10/man2/stty.2')
| -rw-r--r-- | static/v10/man2/stty.2 | 94 |
1 files changed, 94 insertions, 0 deletions
diff --git a/static/v10/man2/stty.2 b/static/v10/man2/stty.2 new file mode 100644 index 00000000..eafb34a5 --- /dev/null +++ b/static/v10/man2/stty.2 @@ -0,0 +1,94 @@ +.pa 1 +.he 'STTY (II)'6/12/72'STTY (II)' +.tr | +.ti 0 +NAME stty -- set mode of typewriter +.sp +.ti 0 +SYNOPSIS (file descriptor in r0) +.br +sys stty; arg / stty = 31. +.br +.li +... +.ti -6 +arg: dcrsr; dctsr; mode +.sp +.ti 0 +DESCRIPTION stty____ +sets mode bits for a typewriter whose file descriptor +is passed in r0. +First, the system delays until the typewriter is quiescent. +Then, the argument dcrsr_____ is placed into the typewriter's +receiver control and status register, +and dctsr_____ is placed in the transmitter control and status register. +The DC-11 manual must be consulted for the format of these +words. +For the purpose of this call, the most important ro^le of +these arguments is to adjust to the speed of the typewriter. +.sp +The mode____ argument contains several bits which determine the +system's treatment of the typewriter: +.sp +.in +3 +.nf +200 even parity allowed on input (e. g. for M37s) +100 odd parity allowed on input +040 raw mode: wake up on all characters +020 map CR into LF; echo LF or CR as LF-CR +010 echo (full duplex) +004 map upper case to lower on input (e. g. M33) +002 echo and print tabs as spaces +001 inhibit all function delays (e. g. CRTs) +.fi +.in -3 +.sp +.fi +Characters with the wrong parity, as determined by bits 200 and +100, are ignored. +.sp +In raw mode, every character is passed back immediately +to the program. No erase or kill processing is done; +the end-of-file character (EOT), the interrupt character +(DELETE) and the quit character (FS) are not treated specially. +.sp +Mode 020 causes input carriage returns to be turned into +new-lines; +input of either CR or LF causes LF-CR both to +be echoed +(used for GE TermiNet 300's and other terminals without the newline function). +.sp +Additional bits in the high order byte of the mode argument +are used to indicate that the terminal is an IBM|2741 +and to specify 2741 modes. +These mode bits are: +.sp +.in+8 +.ll+6 +.ti-6 +|400 terminal is an IBM|2741 +.ti-6 +1000 the 2741 has the transmit interrupt feature (currently ignored) +.ti-6 +2000 use correspondence code conversion on output +.ti-6 +4000 use correspondence code conversion on input (currently ignored) +.sp +.in -8 +.ll-6 +Normal input and output code conversion +for 2741s is EBCDIC (e. g. 963 ball and corresponding keyboard). +The presence of the transmit interrupt feature permits +the system to do read-ahead while no output is in progress. +In 2741 mode, the low order bits 331 are ignored. +.ti0 +.sp +SEE ALSO stty(I), gtty(II) +.sp +.ti 0 +DIAGNOSTICS The error bit +(c-bit) is set if the file descriptor does not refer to a typewriter. +.sp +.ti 0 +BUGS This call should be used with care. +.tr || |