diff options
Diffstat (limited to 'static/netbsd/man4/run.4')
| -rw-r--r-- | static/netbsd/man4/run.4 | 231 |
1 files changed, 231 insertions, 0 deletions
diff --git a/static/netbsd/man4/run.4 b/static/netbsd/man4/run.4 new file mode 100644 index 00000000..73c9e8e9 --- /dev/null +++ b/static/netbsd/man4/run.4 @@ -0,0 +1,231 @@ +.\" $NetBSD: run.4,v 1.4 2013/07/31 13:34:04 soren Exp $ +.\" $OpenBSD: run.4,v 1.34 2012/03/24 15:11:04 jsg Exp $ +.\" +.\" Copyright (c) 2008 Damien Bergamini <damien.bergamini@free.fr> +.\" +.\" Permission to use, copy, modify, and distribute this software for any +.\" purpose with or without fee is hereby granted, provided that the above +.\" copyright notice and this permission notice appear in all copies. +.\" +.\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES +.\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF +.\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR +.\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES +.\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN +.\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF +.\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. +.\" +.Dd July 31, 2013 +.Dt RUN 4 +.Os +.Sh NAME +.Nm run +.Nd Ralink Technology USB IEEE 802.11a/b/g/n wireless network device +.Sh SYNOPSIS +.Cd "run* at uhub? port ?" +.Sh DESCRIPTION +The +.Nm +driver supports USB 2.0 wireless adapters based on the Ralink RT2700U, +RT2800U and RT3000U chipsets. +.Pp +The RT2700U chipset consists of two integrated chips, an RT2770 MAC/BBP and +an RT2720 (1T2R) or RT2750 (dual-band 1T2R) radio transceiver. +.Pp +The RT2800U chipset consists of two integrated chips, an RT2870 MAC/BBP and +an RT2820 (2T3R) or RT2850 (dual-band 2T3R) radio transceiver. +.Pp +The RT3000U is a single-chip solution based on an RT3070 MAC/BBP and +an RT3020 (1T1R), RT3021 (1T2R), RT3022 (2T2R) or RT3052 (dual-band 2T2R) +radio transceiver. +.Pp +These are the modes the +.Nm +driver can operate in: +.Bl -tag -width "IBSS-masterXX" +.It BSS mode +Also known as +.Em infrastructure +mode, this is used when associating with an access point, through +which all traffic passes. +This mode is the default. +.It monitor mode +In this mode the driver is able to receive packets without +associating with an access point. +This disables the internal receive filter and enables the card to +capture packets from networks which it wouldn't normally have access to, +or to scan for access points. +.El +.Pp +The +.Nm +driver can be configured to use +Wired Equivalent Privacy (WEP) or +Wi-Fi Protected Access (WPA-PSK and WPA2-PSK). +WPA is the de facto encryption standard for wireless networks. +It is strongly recommended that WEP +not be used as the sole mechanism +to secure wireless communication, +due to serious weaknesses in it. +The +.Nm +driver offloads both encryption and decryption of data frames to the +hardware for the WEP40, WEP104, TKIP(+MIC) and CCMP ciphers. +.Pp +The +.Nm +driver can be configured at runtime with +.Xr ifconfig 8 +or on boot with +.Xr ifconfig.if 5 . +.Sh FILES +The driver needs the following firmware files, +which are loaded when an interface is brought up: +.Pp +.Bl -tag -width Ds -offset indent -compact +.It /libdata/firmware/run/run-rt2870 +.It /libdata/firmware/run/run-rt3071 +.El +.Sh HARDWARE +The following adapters should work: +.Pp +.Bl -tag -width Ds -offset indent -compact +.It Airlink101 AWLL6090 +.It ASUS USB-N11 +.It ASUS USB-N13 +.It ASUS WL-160N +.It Belkin F5D8051 ver 3000 +.It Belkin F5D8053 +.It Belkin F5D8055 +.It Belkin F6D4050 ver 1 +.It Belkin F6D4050 ver 2 +.It Belkin F7D1101 ver 2 +.It Buffalo WLI-UC-AG300N +.It Buffalo WLI-UC-G300N +.It Buffalo WLI-UC-G301N +.It Buffalo WLI-UC-GN +.It Buffalo WLI-UC-GNHP +.It Buffalo WLI-UC-GNM +.It Buffalo WLI-UC-GNM2 +.It Cisco AM10 +.It Corega CG-WLUSB2GNL +.It Corega CG-WLUSB2GNR +.It Corega CG-WLUSB300AGN +.It Corega CG-WLUSB300GNM +.It D-Link DWA-130 rev B1 +.It D-Link DWA-140 +.It DrayTek Vigor N61 +.It Edimax EW-7711UAn +.It Edimax EW-7711UTn +.It Edimax EW-7717Un +.It Edimax EW-7718Un +.It Edimax EW-7722UTn +.It Gigabyte GN-WB30N +.It Gigabyte GN-WB31N +.It Gigabyte GN-WB32L +.It Hawking HWDN1 +.It Hawking HWUN1 +.It Hawking HWUN2 +.It Hercules HWNU-300 +.It Linksys AE1000 +.It Linksys WUSB54GC v3 +.It Linksys WUSB600N +.It Logitec LAN-W150N/U2 +.It Logitec LAN-W300N/U2 +.It Mvix Nubbin MS-811N +.It Planex GW-US300Mini-X +.It Planex GW-US300MiniS +.It Planex GW-US300MiniW +.It Planex GW-USMicro300 +.It Planex GW-USMicroN +.It Sitecom WL-182 +.It Sitecom WL-188 +.It Sitecom WL-301 +.It Sitecom WL-302 +.It Sitecom WL-315 +.It Sitecom WLA-4000 +.It Sitecom WLA-5000 +.It SMC SMCWUSBS-N2 +.It Sweex LW153 +.It Sweex LW303 +.It Sweex LW313 +.It TRENDnet TEW-645UB +.It Unex DNUR-81 +.It Unex DNUR-82 +.It ZyXEL NWD-211AN +.It ZyXEL NWD-271N +.It ZyXEL NWD2105 +.It ZyXEL NWD210N +.It ZyXEL NWD2205 +.It ZyXEL NWD270N +.El +.Sh EXAMPLES +The following +.Xr ifconfig.if 5 +example configures run0 to join whatever network is available on boot, +using WEP key +.Dq 0x1deadbeef1 , +channel 11, obtaining an IP address using DHCP: +.Bd -literal -offset indent +dhcp NONE NONE NONE nwkey 0x1deadbeef1 chan 11 +.Ed +.Pp +Join an existing BSS network, +.Dq my_net : +.Bd -literal -offset indent +# ifconfig run0 192.168.1.1 netmask 0xffffff00 nwid my_net +.Ed +.Sh DIAGNOSTICS +.Bl -diag +.It "run%d: error %d, could not read firmware %s" +For some reason, the driver was unable to read the microcode file from the +filesystem. +The file might be missing or corrupted. +.It "run%d: could not load 8051 microcode" +An error occurred while attempting to upload the microcode to the onboard 8051 +microcontroller unit. +.It "run%d: device timeout" +A frame dispatched to the hardware for transmission did not complete in time. +The driver will reset the hardware. +This should not happen. +.El +.Sh SEE ALSO +.Xr arp 4 , +.Xr ifmedia 4 , +.Xr netintro 4 , +.Xr usb 4 , +.Xr ifconfig.if 5 , +.Xr wpa_supplicant.conf 5 , +.Xr ifconfig 8 , +.Xr wpa_supplicant 8 +.Pp +Ralink Technology: +.Pa http://www.ralinktech.com/ +.Sh HISTORY +The +.Nm +driver first appeared in +.Ox 4.5 +and in +.Nx 7.0 . +.Sh AUTHORS +.An -nosplit +The +.Nm +driver was written by +.An Damien Bergamini +.Aq damien@openbsd.org +for +.Ox +and ported to +.Nx +by +.An FUKAUMI Naoki . +.Sh CAVEATS +The +.Nm +driver does not support any of the 802.11n capabilities offered by the +RT2800 and RT3000 chipsets. +Additional work is required in +.Xr ieee80211 9 +before those features can be supported. |